Welcome To Campervan Furniture Ltd
Large Flat Pack Furniture Kits - ordering process and what's included.
Kits are made to order and are made to your own custom measurements and design. You can provide your own measurements or we can provide you with some initial generic measurements tailored to your van to get you started. Whilst we are happy to discuss designs and layout with you and offer as much advice as we can, it is your responsibility to make sure all measurements are correct and that the design is right. You need to take into account and think about location of wheel arches, windows, roof vents, etc. We will not be held responsible for any incorrect measurements or design.
The kits come as individual pieces with all doors fitted and hinged and all edge trim fitted. All the panels come as square pieces so you will have to scribe them to match the shape and profile of your vehicle. Please note that bulkheads, seat and bed base are not included in the kits and will have to be sourced yourself and appropriately fitted/braced. You will receive a basic fitting guide and basic fitting kit (you may have to purchase extra screws/brackets to ensure your kit is securely fastened in your van). It is your responsibility to make sure the kit is fitted safely and securely.
Once you have placed a deposit for a large flat pack kit, we will email you a 3D image of your layout design with all the measurements, you then need to check these in your van make sure they are correct, it’s easy to make changes at this stage so if you decide you want anything altering or the measurements are not correct, just let us know and we will change the drawing. We can repeat this process as many times as you want until you are 100% happy with design and are confident that all the measurements are correct. Once you’re satisfied you sign off the drawing we are then ready to start cutting your furniture and making your cushions. PLEASE NOTE, any changes made after the drawing has been signed off or after delivery of the kit will be chargeable.
These kits need to be fitted by someone who is competent to do so, a good level of DIY skills is recommended. You will need tools such as a jig saw and good quality electric screw driver. There are a lot of pieces and although the pieces will be labelled, there are a lot of them and the kits can be complicated so you need to make sure whoever is fitting the kit is confident in doing so and able to understand the 3D drawings. The kits must be securely and safely fitted.
It is important to ensure that any appliances fitted to your vehicle are done by someone who is qualified/competent to do so and in line with regulations and guidelines.
We would generally allow between 3-6 days to fit the kits depending on the design of the kit and the speed at which you work.
Kits generally take between 2-4 weeks to make from the time of drawing sign off.