Ordering process

You can either send us an email or call the phone number and we can begin discussing your furniture kit.

1. Get in touch

Kits are made to order and are made to your own custom measurements and design. You can provide your own measurements or we can provide you with some initial generic measurements tailored to your van to get you started. Whilst we are happy to discuss designs and layout with you and offer as much advice as we can, it is your responsibility to make sure all measurements are correct and that the design is right. You need to take into account and think about the location of wheel arches, windows, roof vents, etc. Please make sure it is all correct as we will not be held responsible for any incorrect measurements or design.

2. Measure your van

3. pay the deposit

Once you have placed a deposit for a large flat pack kit, we will email you a 3D image of your layout design with all the measurements, you then need to check these in your van to make sure they are correct, it’s easy to make changes at this stage, so if you decide you want anything altering or the measurements are not correct, just let us know and we will change the drawing. We can repeat this process as many times as you want until you are 100% happy with the design and confident that all the measurements are correct. Once you’re satisfied, you sign off the drawing we are then ready to start cutting your furniture. PLEASE NOTE, any changes made after the drawing has been signed off or after delivery of the kit will be chargeable.

4. Getting your kit

The kit can either be collected or delivered (mainland UK only). The kits come as individual pieces with all doors fitted and hinged, and all edge trim fitted. Please note that bulkheads, seat and bed bases are not included in the kits and will have to be sourced yourself and appropriately fitted/braced. You will receive a basic fitting guide and basic fitting kit (you may have to purchase extra screws/brackets to ensure your kit is securely fastened in your van). You can expect the kit to take 2-4 weeks to make from the time of signing off and for them to generally take 3-6 days to fit depending on the design and the speed at which you work.

!Disclaimer!

These kits need to be fitted by someone competent to do so, a good level of DIY skills is recommended. You will need tools such as a jigsaw and a good-quality electric screwdriver. There are a lot of pieces and although the pieces will be labelled, there are a lot of them and the kits can be complicated so you need to make sure whoever is fitting the kit is confident in doing so and able to understand the 3D drawings. The kits must be securely and safely fitted.
It is important to ensure that any appliances fitted to your vehicle are done by someone qualified/competent to do so and in line with regulations and guidelines.